淮安附近有没有服务

Hello, welcome to the stainless steel water tank manufacturer!

National hotline

eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

Your location: home page > News Center > Company news

Talk about the installation, cleaning and maintenance of stainless steel water tank

Release date: April 25, 2020 Number of visits: four hundred and forty-five

In the air source heat pump hot water project, the water tank is essential. At present, stainless steel water tank is mostly used. However, due to the large water tank configuration of the project, the appropriate address and bearing foundation must be selected during the installation to avoid the impact Stainless steel water tank At the same time, avoid the occurrence of safety accidents. So, what are the bearing foundations of stainless steel water tanks? What precautions should be paid attention to when installing? What about daily cleaning and maintenance?

What are the bearing foundations of stainless steel water tanks?

Classification of stainless steel water tank foundation

Stainless steel square water tank installation precautions?

1. Provide clean water for installation power supply and sealing inspection;

Install the front water tank according to the requirements of the manual;

When welding to the water tank, do not use the fire protection measures on the side of the water tank;

4. Do not stack large sundries around the water tank to ensure enough space for inspection and safety;

5. It is better not to knock the water tank with hard objects;

6. Whether the water tank is large or small, it should be placed on the bearing beam frame;

7. When the water tank is installed, it should not be lower than or higher than the unit configuration, and it is better to be on the same level with the unit configuration;

8. The inlet and outlet pipes of the water tank must be made of rubber to avoid expansion of the pipes;

9. The water tank shall be placed on the horizontal surface without ponding;

10. The water tank should be placed in a clean position to prevent pollution from flowing into the water tank.

 360 screenshot 20200425144418355.jpg

How to clean stainless steel water tank?

Although the stainless steel water tank is clean and sanitary, it is not easy to grow moss, but it also needs to be cleaned regularly. So, how to clean the stainless steel water tank?

Stainless steel water tank as a container for secondary water supply, in the long run, there will be attachments on the surface of the water tank, and there will be sediments inside, so we need to regularly wipe off the surface attachments. Before today, we talked about the main steps of cleaning the water tank

For internal cleaning, the water should be drained before cleaning. Since the internal cleaning cycle is long, the sediment is thick, so mops and brooms may be needed. Previously, we talked about the cleaning steps of water tank. Today, we mainly talk about the scale cleaning inside the stainless steel water tank. If it is used for a long time, in order to ensure the water quality, the scale must be cleaned.

1. The general scale cleaning agent can be used, but it will not clean thoroughly, produce peculiar smell, and cause corrosion to the water tank itself, which greatly shortens the service life of the water tank.

2. Professional water tank descaling agent, compared with the ordinary descaling method, cleaning is more thorough, and there is no obvious odor, and there is no corrosive effect on the water tank.

3. Manual cleaning method, using manual scraping, shovel and other methods to remove scale, but pay attention to the method. Although the efficiency is lower than the above two methods, it will not produce corrosion in the water tank.

How to maintain the stainless steel water tank?

(1) If there is any problem, please do not put it on the top of the tank.   

(2) As a secondary equipment for storing domestic water, stainless steel water tank can only hold domestic water (fire water), but not sulfuric acid or liquid with high acid and alkaline content.  

(3) Do not open the water tank inlet cover at will to prevent the water quality from secondary pollution. At the same time, pay attention to cleaning in the process of use. The water tank should be cleaned and disinfected 1-2 times a year.                 

Stainless steel water tank has the advantages of light weight, high strength, corrosion resistance, high temperature resistance, clean water quality, anti-seepage, anti-seismic, never moss, convenient installation, no maintenance, easy cleaning and so on. In the process of using stainless steel water tank, we should do the usual maintenance work, and give full play to the good performance of the water tank.


All rights reserved by the manufacturer of stainless steel water tank Engine technology network

Scan and consult wechat customer service
eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine