淮安附近有没有服务

Hello, welcome to the stainless steel water tank manufacturer!

National hotline

eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

Your location: home page > News Center > Industry trends

Heat preservation and antifreeze measures and process requirements of stainless steel water tank

Release date: June 5, 2020 Number of visits: five hundred and ninety-eight

Due to Stainless steel water tank It has no insulation effect. Therefore, the cold water tank needs to be maintained in the cold. When purchasing, the focus is not on the price of stainless steel water tank, but on the choice of better stainless steel heat preservation water tank, such as polyurethane foam or rubber sponge material as insulation layer of stainless steel heat preservation water tank.

 

Because of its good heat insulation performance, this kind of water tank is very suitable for cold place. At the same time, as a heat preservation tank, the method of welding device is also very special. Using high frequency resistor to stop welding greatly improves the overall sealing performance of water tank; the data of water tank are mechanical stamping and flange connection.


Because of the heat-resistant structure of the water tank and the heat preservation device at the bottom of the water tank can be improved, and the heat insulation device at the bottom of the water tank can be reduced. Improve the insulation performance; in the case of no overflow pipe, anti convection equipment can be installed to prevent the water flow in the water tank from colliding with the external water flow; in cold winter, if the water tank is not used, the water drainage in the water tank should be stopped to avoid freezing and shrinkage, which will lead to the water tank bursting.

 360 screenshot 20200605144530162.jpg

Although in more cases, stainless steel water tanks have high requirements for the production of materials, but when the production process does not meet the requirements, its quality will be greatly reduced. Therefore, for this product, there is still a need for better process improvement. Of course, different manufacturers have different process conditions.


The first is the equipment condition, because this water tank is also a one-time molding process. If the manufacturer's equipment conditions are insufficient, it cannot be carried out. Let the product process be improved, there are some products in the industry can see whether there is no hardness of soft collapse. One of the big reasons is that the manufacturer's equipment is unreliable, so the material of the product can't be melted better. And the glass ratio has no better uniformity.


In addition to the equipment conditions, there are technical conditions, all processes are inseparable from technology. The manufacturer's stainless steel water tank is often not glossy when the surface condition is not smooth. Because the surface of the water tank is not smooth and moderate, the corrosive molecules in the water can easily enter the water tank wall. The water tank usually deteriorates the water in a few days, and the corrosion molecules in the tank wall will inevitably affect the service life of the water tank.


All rights reserved by the manufacturer of stainless steel water tank Engine technology network

Scan and consult wechat customer service
eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine