淮安附近有没有服务

Hello, welcome to the stainless steel water tank manufacturer!

National hotline

eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

Your location: home page > Product Center
  •  Round stainless steel water tank
  •  Round stainless steel water tank

Round stainless steel water tank

Product Description: Circular stainless steel water tank uses imported corrugated rib rolling machine to form evenly distributed corrugated reinforcing ribs on the plate surface, greatly improving the strength and toughness of the plate, so as to make the water tank more solid. The welding joint is welded by DC high-frequency pulse welding machine, and the joint is formed at one time, with strong tensile strength and beautiful appearance. Circular stainless steel water tank uses imported corrugated rib rolling machine to form corrugated stiffeners evenly distributed on the plate surface, which greatly improves the strength and toughness of the plate
contact number: eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

Detailed introduction

    Round stainless steel water tank The imported corrugated rib rolling machine is used to form evenly distributed corrugated reinforcing ribs on the plate surface, which greatly improves the strength and toughness of the plate, so as to make the water tank more solid. The welding joint is welded by DC high-frequency pulse welding machine, and the joint is formed at one time, which has strong tensile strength, beautiful appearance and firmness.  

Circular stainless steel water tank uses imported corrugated rib rolling machine to form evenly distributed corrugated reinforcing ribs on the plate surface, which greatly improves the strength and toughness of the plate, so as to make the water tank more solid. The welding joint is welded by DC high-frequency pulse welding machine, and the joint is formed at one time, which has strong tensile strength, beautiful appearance and firmness.

  360 screenshot 202004090930501614.jpg

    Product features:

1. The inner cylinder of round stainless steel heat preservation water tank is generally made of SUS304 stainless steel of food grade, with nickel content of more than 8%, which ensures that the steel plate will never rust, corrosion-resistant, durable, low-cost, and its service life can reach more than 30 years.

2. The outer cylinder will be made of stainless steel, color steel, galvanized steel and other materials according to the needs of customers. It is generally made of 201 stainless steel, which is light in weight, beautiful in appearance, clean and hygienic.

3. Polyurethane foam is used in the core layer, with small heat loss, and the thermal insulation effect is 3-5 ℃ temperature difference within 24 hours at room temperature.

4. Beautiful appearance, convenient installation, capacity increase or movement at any time, convenient cleaning, sewage device, no fungus, sand worm and moss.

5. The automatic girth seam and longitudinal pulse welding technology controlled by microcomputer are adopted to ensure that the water tank will never leak; the sealing performance is good, and the water quality can be ensured without secondary pollution.

6. According to the customer's requirements, each hole position is opened, which is convenient and simple to install on site; different sizes of water tanks can also be customized according to the customer's requirements.


Maintenance:

Round stainless steel heat preservation water tank is widely used, both cold and hot water, especially suitable for hot water supplement and storage, such as heat pump water heater.

Specifications range from 1 to 35 tons. It is widely used in hotels, hotels, bathing centers, resorts and other high-end places.

1. When piping, do not apply excessive load to the inlet and outlet of piping.

2. Do not directly apply the weight of valve and large diameter pipe to the water tank nozzle, and set up pipe support if necessary.

3. Expansion flexible joint shall be installed for expansion, contraction and vibration of welded pipe.

 Screenshot of jp4090360.439g

main parameter

1. Welding seam and material of water supply tank: the following is prepared according to the technical parameters of stamping stainless steel water tank. The water tank accessories are made of ordinary carbon steel plate and shaped steel, and lb304ni8.0 type welding rod is used for welding. The quality shall meet the requirements of current standards carbon structural steel and carbon steel electrode respectively.

Butt welding is adopted for lb304 stainless steel plate at the top, wall and bottom of the box (top plate is I-type weld, bottom plate and side wall is V-shaped weld). Other welding is fillet weld. There is no cross between the welds, and it is not allowed to overlap with the reinforcing rib. The welding machine is lb-2-300 special welding machine for stainless steel water tank, which has the functions of electric welding and argon welding.

2. Full water experiment

After the water tank is made, the water tank shall be fully filled with water. After 2-3 hours, tap the water tank with hammer lead weighing 0.5-1.5 kg along the two sides of the weld joint about 150 mm. If there is no water leakage, it is qualified. If there is water leakage, it is necessary to re weld and then conduct the experiment.


All rights reserved by the manufacturer of stainless steel water tank Engine technology network

Scan and consult wechat customer service
eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine