淮安附近有没有服务

Hello, welcome to the stainless steel water tank manufacturer!

National hotline

eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

Your location: home page > Product Center
  •  Combined stainless steel water tank
  •  Combined stainless steel water tank

Combined stainless steel water tank

Product Description: The welding seam of the combined stainless steel water tank shall be full, and the welding surface of the outer layer of the stainless steel water tank shall be smooth and beautiful, without slag inclusion, weld beading, air hole and crack, and the welding interface shall be free of concave crack, separation and hand cutting. The welding seam of stainless steel tank liner needs polishing treatment. The flat bottom plate of stainless steel water tank shall be kept flat. When the water tank is filled with water, there shall be no leakage or obvious deformation. The water tank shall be filled with water according to the requirements of steel welded atmospheric pressure vessel
contact number: eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

Detailed introduction

    Combined stainless steel water tank The welding seam shall be full, and the welding surface of the stainless steel water tank shall be smooth and beautiful without slag inclusion, weld bead, air hole and crack, and the welding interface shall be free of concave crack, separation and hand cutting. The welding seam of stainless steel tank liner needs polishing treatment. The flat bottom plate of stainless steel water tank shall be kept flat. When the water tank is filled with water, there shall be no leakage or obvious deformation. It shall be carried out according to the relevant full water test provisions of steel welded atmospheric pressure vessel.


The top and manhole of combined stainless steel water tank shall be fully welded. The joints of the stainless steel water tank shall be well welded, and at the same time, it shall be vertical as far as possible, and the inclination shall not be greater than 1 °. The insulation layer shall be firmly combined with the surface of the water tank, and the appearance shall be smooth. Polyurethane foam plastics or better performance insulation materials shall be used for the thermal insulation layer; stainless steel plate or other suitable materials shall be used for the outer decorative shell, and the surface shall not be uneven, scratched or rusty; the actual water capacity of the stainless steel water tank shall not be less than the nominal volume; after the welding of the stainless steel water tank, the fasteners shall not be loose, and the connecting parts shall not have leakage welding.

 360 screenshot 202004090842203947.jpg

The side plate of the stainless steel water tank is made like a trapezoid, which can not only improve the strength of the plate, but also has no instruction on the inner wall, which is very smooth. If you want to clean it, it is very easy, and the appearance is also very beautiful. The top plate of stainless steel water tank is folded into an angle shape, which can also improve the strength of the plate. It also has the characteristics of easy cleaning, no water accumulation and beautiful appearance. The air vent is equipped with filter cotton, which can prevent the dust in the air from polluting the water quality.


The stainless steel water tank is well designed, but it should also be installed according to the specification of water supply facilities. The greater thickness means that more coolant can be contained in the tank. The stainless steel water tank's water trough setting will let the water drop condensation in the water tank concentrate and then flow to the place where the water is discharged, so it can keep the channel steel from moisture and rust.

The stainless steel water tank itself cannot work properly. It can only work by connecting pipes, and it is not the same as connecting pipes. Then, Xiaobian will talk about how to connect the stainless steel water tank with the pipeline.

1、 Welding

This method is mainly used for the connection of the same materials, and for the welding of various metal pipes, especially copper pipes.

2、 Hot melt

It mainly uses the same material as thermoplastic for pipe connection, and the strength of this connection is very high.

3. Machinery

Mechanical connection is suitable for different pipes. For example, when the connection between the appliance and the pipe is needed, the mechanical connection is basically used.

Fourth, integration

The main characteristic of this method is that it is fast and convenient. It is basically undisturbed by external factors. It is important that the welding quality is high after welding, but the welding of fusion welding has limitations and installation. Parts, etc.

 360 screenshot 20200409084144526.jpg


  technical parameter

 4-19100Q53123L4.jpg


All rights reserved by the manufacturer of stainless steel water tank Engine technology network

Scan and consult wechat customer service
eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine